Northumberland Climbing

Module:UnitTests

UnitTests provides a unit test facility that can be used by other scripts using require. Following is an example: 

-- Unit tests for [[Module:Bananas]]. Click talk page to run tests.
local p = require('Module:UnitTests')

function p:test_hello()
    self:preprocess_equals('Hello, world!', 'Hello World!')
end

return p

This would be executed with {{#invoke: Bananas/testcases | run_tests}}. Test methods like test_hello above must begin with "test".

MethodsEdit

run_testsEdit

  • run_tests
    : Runs all tests. Normally used on talk page of unit tests.
    {{#invoke:Bananas/testcases|run_tests}}
  • If 
    differs_at=1
    is specified, a column will be added showing the first character position where the expected and actual results differ.
    {{#invoke:Bananas/testcases|run_tests|differs_at=1}}

preprocess_equalsEdit

  • preprocess_equals(text, expected, options)
    : Gives a piece of wikitext to preprocess and an expected resulting value. Scripts and templates can be invoked in the same manner they would be in a page.
    self:preprocess_equals('{{#invoke:Bananas | hello}}', 'Hello, world!',{nowiki=1})

preprocess_equals_manyEdit

  • preprocess_equals_many(prefix, suffix, cases, options)
    : Performs a series of preprocess_equals() calls on a set of given pairs. Automatically adds the given prefix and suffix to each text.
    self:preprocess_equals_many('{{#invoke:BananasArgs | add |', '}}', {
        {'2|3', '5'},
        {'-2|2', '0'},
    },{nowiki=1})

preprocess_equals_preprocessEdit

  • preprocess_equals_preprocess(text, expected, options)
    : Gives two pieces of wikitext to preprocess and determines if they produce the same value. Useful for comparing scripts to existing templates.
    self:preprocess_equals_preprocess('{{#invoke:Bananas | hello}}', '{{Hello}}',{nowiki=1})

preprocess_equals_preprocess_manyEdit

  • preprocess_equals_preprocess_many(prefix, suffix, cases, options)
    : Performs a series of preprocess_equals_preprocess() calls on a set of given pairs. The prefix/suffix supplied for both arguments is added automatically. If in any case the second part is not specified, the first part will be used.
    self:preprocess_equals_preprocess_many('{{#invoke:Foo | spellnum |', '}}', '{{spellnum', '}}', {
        {'2'}, -- equivalent to {'2','2'},
        {'-2', '-2.0'},
    },{nowiki=1})

equalsEdit

  • equals(name, actual, expected, options)
    : Gives a computed value and the expected value, and checks if they are equal according to the == operator. Useful for testing modules that are designed to be used by other modules rather than using #invoke.
    self:equals('Simple addition', 2 + 2, 4,{nowiki=1})

equals_deepEdit

  • equals_deep(name, actual, expected, options)
    : Like equals, but handles tables by doing a deep comparison. Neither value should contain circular references, as they are not handled by the current implementation and may result in an infinite loop.
    self:equals_deep('Table comparison', createRange(1,3), {1,2,3},{nowiki=1})

See alsoEdit

-- UnitTester provides unit testing for other Lua scripts. For details see [[Wikipedia:Lua#Unit_testing]].
-- For user documentation see talk page.
local UnitTester = {}

local frame, tick, cross
local result_table_header = "{|class=\"wikitable\"\n! !! Text !! Expected !! Actual"
local result_table = ''
local num_failures = 0

function first_difference(s1, s2)
    if s1 == s2 then return '' end
    local max = math.min(#s1, #s2)
    for i = 1, max do
        if s1:sub(i,i) ~= s2:sub(i,i) then return i end
    end
    return max + 1
end

function UnitTester:preprocess_equals(text, expected, options)
    local actual = frame:preprocess(text)
    if actual == expected then
        result_table = result_table .. '| ' .. tick
    else
        result_table = result_table .. '| ' .. cross
        num_failures = num_failures + 1
    end
    local maybe_nowiki = (options and options.nowiki) and mw.text.nowiki or function(...) return ... end
    local differs_at = self.differs_at and (' \n| ' .. first_difference(expected, actual)) or ''
    result_table = result_table .. ' \n| ' .. mw.text.nowiki(text) .. ' \n| ' .. maybe_nowiki(expected) .. ' \n| ' .. maybe_nowiki(actual) .. differs_at .. "\n|-\n"
end

function UnitTester:preprocess_equals_many(prefix, suffix, cases, options)
    for _, case in ipairs(cases) do
        self:preprocess_equals(prefix .. case[1] .. suffix, case[2], options)
    end
end

function UnitTester:preprocess_equals_preprocess(text1, text2, options)
    local actual = frame:preprocess(text1)
    local expected = frame:preprocess(text2)
    if actual == expected then
        result_table = result_table .. '| ' .. tick
    else
        result_table = result_table .. '| ' .. cross
        num_failures = num_failures + 1
    end
    local maybe_nowiki = (options and options.nowiki) and mw.text.nowiki or function(...) return ... end
    local differs_at = self.differs_at and (' \n| ' .. first_difference(expected, actual)) or ''
    result_table = result_table .. ' \n| ' .. mw.text.nowiki(text1) .. ' \n| ' .. maybe_nowiki(expected) .. ' \n| ' .. maybe_nowiki(actual) .. differs_at .. "\n|-\n"
end

function UnitTester:preprocess_equals_preprocess_many(prefix1, suffix1, prefix2, suffix2, cases, options)
    for _, case in ipairs(cases) do
        self:preprocess_equals_preprocess(prefix1 .. case[1] .. suffix1, prefix2 .. (case[2] and case[2] or case[1]) .. suffix2, options)
    end
end

function UnitTester:equals(name, actual, expected, options)
    if actual == expected then
        result_table = result_table .. '| ' .. tick
    else
        result_table = result_table .. '| ' .. cross
        num_failures = num_failures + 1
    end
    local maybe_nowiki = (options and options.nowiki) and mw.text.nowiki or function(...) return ... end
    local differs_at = self.differs_at and (' \n| ' .. first_difference(expected, actual)) or ''
    result_table = result_table .. ' \n| ' .. name .. ' \n| ' .. maybe_nowiki(tostring(expected)) .. ' \n| ' .. maybe_nowiki(tostring(actual)) .. differs_at .. "\n|-\n"
end

local function deep_compare(t1, t2, ignore_mt)
    local ty1 = type(t1)
    local ty2 = type(t2)
    if ty1 ~= ty2 then return false end
    if ty1 ~= 'table' and ty2 ~= 'table' then return t1 == t2 end
    
    local mt = getmetatable(t1)
    if not ignore_mt and mt and mt.__eq then return t1 == t2 end
    
    for k1, v1 in pairs(t1) do
        local v2 = t2[k1]
        if v2 == nil or not deep_compare(v1, v2) then return false end
    end
    for k2, v2 in pairs(t2) do
        local v1 = t1[k2]
        if v1 == nil or not deep_compare(v1, v2) then return false end
    end

    return true
end

function val_to_str(v)
    if type(v) == 'string' then
        v = mw.ustring.gsub(v, '\n', '\\n')
        if mw.ustring.match(mw.ustring.gsub(v, '[^\'"]', ''), '^"+$') then
            return "'" .. v .. "'"
        end
        return '"' .. mw.ustring.gsub(v, '"', '\\"' ) .. '"'
    else
        return type(v) == 'table' and table_to_str(v) or tostring(v)
    end
end

function table_key_to_str(k)
    if type(k) == 'string' and mw.ustring.match(k, '^[_%a][_%a%d]*$') then
        return k
    else
        return '[' .. val_to_str(k) .. ']'
    end
end

function table_to_str(tbl)
    local result, done = {}, {}
    for k, v in ipairs(tbl) do
        table.insert(result, val_to_str(v))
        done[k] = true
    end
    for k, v in pairs(tbl) do
        if not done[k] then
            table.insert(result, table_key_to_str(k) .. '=' .. val_to_str(v))
        end
    end
    return '{' .. table.concat(result, ',') .. '}'
end

function UnitTester:equals_deep(name, actual, expected, options)
    if deep_compare(actual, expected) then
        result_table = result_table .. '| ' .. tick
    else
        result_table = result_table .. '| ' .. cross
        num_failures = num_failures + 1
    end
    local maybe_nowiki = (options and options.nowiki) and mw.text.nowiki or function(...) return ... end
    local actual_str = val_to_str(actual)
    local expected_str = val_to_str(expected)
    local differs_at = self.differs_at and (' \n| ' .. first_difference(expected_str, actual_str)) or ''
    result_table = result_table .. ' \n| ' .. name .. ' \n| ' .. maybe_nowiki(expected_str) .. ' \n| ' .. maybe_nowiki(actual_str) .. differs_at .. "\n|-\n"
end

function UnitTester:run(frame_arg)
    frame = frame_arg
    self.frame = frame
    self.differs_at = frame.args['differs_at']
    tick = frame:preprocess('{{Tick}}')
    cross = frame:preprocess('{{Cross}}')

    local table_header = result_table_header
    if self.differs_at then
        table_header = table_header .. ' !! Differs at'
    end

    -- Sort results into alphabetical order.
    local self_sorted = {}
    for key,value in pairs(self) do
        if key:find('^test') then
            table.insert(self_sorted, key)
        end
    end
    table.sort(self_sorted)
    -- Add results to the results table.
    for i,value in ipairs(self_sorted) do
        result_table = result_table .. "\n\n'''" .. value .. "''':\n" .. table_header .. "\n|-\n"
        self[value](self)
        result_table = result_table .. "|}"    
    end

    return (num_failures == 0 and '<strong style="color:#008000;">All tests passed.</strong>' or '<strong class="error" style="font-size:100%;">' .. num_failures .. ' tests failed.</strong>') .. frame:preprocess(result_table)
end

function UnitTester:new()
    local o = {}
    setmetatable(o, self)
    self.__index = self
    return o
end

local p = UnitTester:new()
function p.run_tests(frame) return p:run(frame) end
return p
Retrieved from "https://northumberlandclimbing.co.uk/index.php?title=Module:UnitTests&oldid=673"